Laboy Glass Vacuum Flow-Control Adapter With PTFE Stopcock 90Dgr Bent

In stock
SKU
HMA0133
Add to Compare
Grouped product items
 Product Name Qty
Flow-Control Adapter 90Dgr 14/20 Bent With Ptfe Stopcock
Special Price $20.47 Regular Price $34.11
Flow-Control Adapter 90Dgr 19/22 Bent With Ptfe Stopcock
Special Price $20.74 Regular Price $34.55
Flow-Control Adapter 90Dgr 24/40 Bent With Ptfe Stopcock
Special Price $22.94 Regular Price $38.23
Flow-Control Adapter 90Dgr 29/42 Bent With Ptfe Stopcock
Special Price $23.39 Regular Price $38.97
  • The flow control adapter is with 2mm PTFE stopcock,bent 8mm hose connection, Standard taper inner joint.
  • The 2mm PTFE stopcock provides on/off control with the main valve to regulate the flow into reaction system
  • Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure in vacuum distillation
  • The glass adapter is made of borosilicate glass 3.3,high quality,heavy wall,durable and reusable
Vacuum Flow-control Adapter,with 2mm PTFE stopcock to control the flow during distillation or reaction.With 14/20 standard taper joint at bottom to fit an interchangeable female joint.The 8mm hose connection is bent at 90 degree,which can accommodate a 6mm I.D.rubber tubing.
This flow control adapter is used to control or regulate the flow of gases into a reaction system. For example, for reflux performed under an inert atmosphere, this adapter can be placed at the top of the reflux condenser and connected to the inert gas supply system .Also it can be used with single-neck flasks in order to pull a vacuum on the system. And if placed on multi-neck flasks, this adapter is connected to an inert gas supply to permit counterflow operations at the other necks.
Laboy Glass inlet adapter is made of high-quality borosilicate glass and annealed at 800 degree Celsius ,can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.
All the jointed glassware products in Laboy are made by hand-blowing,heavy wall design,for the interchangeable joints,they are finely grounded both by machined and hand to ensure leak free.All the glass joints has a standard 1:10 taper, it can fit any glassware with joint which has the same taper and same outside diameter as long as the apparatus to which they are attached does not interfere. For example, an adapter with 14/20 male joint will fit into a 14/35 flask.
Back to Top

Flow-Control Adapter Vacuum Adapter Inlet Adapter Glass Adapter Lab Glassware Laboyglass