The 3 way distilling thermometer adapter has a compression cap to form a vacuum tight seal of plain thermometer on Top.
With two inner joints at bottom and side,and the two joints are at a angle of 75 Degree .The bottom joint is usually connected to a distilling column for fractionation distillation or a distilling flask for the steam or vacuum distillation.The side joint may connect to a liebig or west condenser for water in and out when the temperature below 150 degree C,connect a air condenser if temperature above 150 degree C.
The compression cap and o-ring fitting the thread opening at the top of the adapter, accommodating a thermometer or bleeding tube.
Laboy Glass 3 way thermometer adapter is made of high-quality borosilicate glass and annealed at 800 degree Celsius ,can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.
All the jointed glassware products in Laboy are made by hand-blowing,heavy wall design,for the interchangeable joints,they are finely grounded both by machine and hand to ensure leak free.All the glass joints has a standard 1:10 taper, it can fit any glassware with joint which has the same taper and same outside diameter as long as the apparatus to which they are attached does not interfere. For example, an adapter with 14/20 male joint will fit into a 14/35 flask.