Laboy Glass Inlet Adapter for Precise Gas Introduction in Chemistry
- The extended inlet adapter with a 24/40 inner taper joint under the upper two hose connections
- Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure
- With a tube extending below the joint to introduce gas or vacuum to the below flask.
- The glass adapter is made of borosilicate glass 3.3,high quality,heavy wall,durable and reusable
The glass inlet adapter is designed two 8mm hose connections at opposite direction on the top of the inner joint,with a tube extending below the inner joint to introduce gas at the bottom of larger reaction vessels or flasks.The standard taper lower joint can provide a leak free way to any lab glassware parts with standard taper female joint,interchangeable,durable and reusable;The glass hose connector has an O.D.of 8mm at the largest serration ideal for vent or introducing glass or vacuum during a vacuum distillation,fractionation etc in organic chemistry,accepts 3/8'' ID flexible rubber or PTFE tubing.
Laboy Glass inlet adapter is made of high-quality borosilicate glass and annealed at 800 degree Celsius ,can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.
All the jointed glassware products in Laboy are made by hand-blowing,heavy wall design,for the interchangeable joints,they are finely grounded both by machine and hand to ensure leak free.All the glass joints has a standard 1:10 taper, it can fit any glassware with joint which has the same taper and same outside diameter as long as the apparatus to which they are attached does not interfere. For example, an adapter with 14/20 male joint will fit into a 14/35 flask.
Laboy Glass inlet adapter is made of high-quality borosilicate glass and annealed at 800 degree Celsius ,can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.
All the jointed glassware products in Laboy are made by hand-blowing,heavy wall design,for the interchangeable joints,they are finely grounded both by machine and hand to ensure leak free.All the glass joints has a standard 1:10 taper, it can fit any glassware with joint which has the same taper and same outside diameter as long as the apparatus to which they are attached does not interfere. For example, an adapter with 14/20 male joint will fit into a 14/35 flask.
