Simple Distillation Apparatus for Organic Chemistry Lab glassware Set With 24/40 Joints

This simple glassware setup for distillation are all with 24/40 joints is used for separating liquids, boiling below 200DegreeC at atmospheric pressure, from other compounds. For effective separation there should be a difference in the boiling points of the components of at least 80DegreeC.Including:
1.500ml single neck round bottom distillation flask used as a collection vessel.
2.1000ml single neck round bottom boiling flask used as a distillation flask.
3. Three-way thermomter adapter with a compression cap,used to hold the thermometer and to channel the vapour into the condenser. For fractional distillation, the fractionating column is fitted between the distillation flask and the adapter.
4. Vaccum take-off adapter Ben at 105 DGR with drip tip at lower joint to allow the distillate to run into the collecting flask.
5.200mm liebig condenser with 10mm hose connections for water in and out to circulate cold water.
6.0-200 Degrees Celsius range kerosene thermometer .
7.4 pcs plastic joint clip.
Laboy glassware is made of high-quality borosilicate glasss and annealed at 800 degree Celsius ,can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.